The Easy Grip® CONE implant system, offers a simple and complete product in the range, consisting of threaded tapered implants manufactured from ELI grade 5 titanium Available in diameters of 3.75, 4.50 and 5.00 with lengths ranging from 8 to 13 mm that meet the most common implantology needs.
Connection
5° conometric connection
The intimate cone engagement generated by the 5° Easy Grip® CONE connection ensures an adequate sealing of the fixture, minimising the micro-gap with the prosthetic component, preserving good cortical bone health.
Double internal hexagon
The double internal hexagon allows 12 different positions for the insertion of indexed prosthetic components.
Through-screw M1.8
The Easy Grip® CONE connection system provides for the activation and maintenance of the fixture/abutment coupling by screwing with an M1.8 clamping screw.
The activation of the taper coupling and the tightness of the clamping screw are therefore essential elements for the long-term reliability of the implant system.
TFI System srl uses production techniques used in the aeronautical field that increase the breaking strength of clamping screws by around 50 per cent compared to conventional production.
Unique anatomical connection
All Easy Grip® CONE prosthetic components adopt a single connection that can be used on any implant platform, SN, L and XL in platform switching.
The anatomical design of the prosthetic components provides a natural and aesthetic emergence profile for proper soft tissue management.
Morphology
Conical
Series 70
• DN 3.75 Short Neck • DN 4.50 Large • DN 5.00 Extra Large
Conical implant with three full-body, self-centring helical grooves:
• tapping;
• collection of bone frustules;
• increased osseointegration surface area (Dynamic Bone Management).
The rounded apex allows for completely safe use in risk areas and less trauma during insertion, resulting in improved vascularisation and osseointegration.
Anodised collar with circular grooves
The presence of the cortical circular grooves on a rough surface, compared to implants with a smooth neck, offer better conditions for osseointegration and, under functional loading, are more effective in maintaining marginal bone (MBL), preventing natural post-operative bone resorption, resulting in:
• optimisation of load distribution;
• reduction of stress levels;
• decreased bacterial proliferation.
Inverted sawtooth threading with double tapping start
It is a type of square threading which provides an optimised surface for transmission of intrusive loads as well as compressive; these loads are about 10 times lower than those occurring on standard (V-threaded) or spur threads.
Dual-principle coils increase implant insertion performance during the surgical phase.
Progressive compression threading
This is a square loop thread that is significantly load- bearing in the cervical part of the implant and more pronounced in the apical area, which generates targeted bone condensation in the case of insertion in D3/D4 type bone, increasing primary stability, which is particularly necessary in immediate loads.
The grooves on the core and in the ridge reduce friction during insertion into hard bone.
